10-22-2018, 03:23 PM | #1 |
Banned
4488
Rep 10,473
Posts |
For Sale: Set of StopTech Sport Rear Disc Brakes Pad Set - still sealed. Position: both rear calipers. Purchased for use on a BMW F3x that was sold before pads were changed. StopTech Part Number 309.16560. Also includes Hardware Kit P117.34046. These pads fit the standard brakes that came on the 2014+ M Sport brake upgrade (with blue calipers) and the M Performance brake package on the F22 2-series, F30 3-series, and F32 4-series. The M Sport brake upgrade was offered as a stand-alone option and consisted of larger rotors and a 2-piston Brembo rear caliper. The front and rear calipers were blue with the ///M logo. The M Performance brakes were a dealer-installed accessory option and came in red, orange, or yellow/gold caliper colors. Full Fitment list here: https://www.carid.com/stoptech/sport...309-16560.html $60.00 includes shipping. Last edited by IK6SPEED; 12-04-2018 at 04:46 PM.. |
12-24-2018, 03:25 AM | #4 |
Second Lieutenant
111
Rep 232
Posts |
Hey there IK. I'm in the market for rear rotors, pads, and sensors. I was going to upgrade to a lighter cross drilled setup for all 4, with more aggressive pads and switch out the lines as well. It turns out that the front brakes were changed at 30k miles (the car is sitting around 38k currently), so I simply don't see the need to dump for an entire brake setup. I figured I would order rear rotors, pads, and sensors. Something similar to OEM. I have a 2015 335i M-sport with adaptive suspension and Blue brake calipers. I'm pretty sure this is the 4 piston front and 2 piston rear. What do you think? I'm assuming this will fit, and it sounds kind of like an OEM+ setup for the rears.
|
Appreciate
0
|
12-24-2018, 11:06 AM | #5 | |
Banned
4488
Rep 10,473
Posts |
Quote:
Confirmed fit here: https://www.carid.com/stoptech/sport...309-16560.html So if you have blue calipers, they should fit. |
|
Appreciate
0
|
01-11-2019, 05:28 AM | #6 |
Second Lieutenant
111
Rep 232
Posts |
Free bump. Sorry bud. I went with ECS Tuning since I needed rear rotors, sensor, hardware, and pads. I did a big build with them a little over a year ago on a Mk6 Golf R, so I spent quite a bit of $$$. Since then, they pretty much take care of me when I need something. That being said, the current F30 N55 build has mostly been purchased from Mike at Extreme. GLWS! I did a bit of research on your pads, and for an OEM+ replacement, they're all good reviews...
|
Appreciate
0
|
11-26-2019, 06:48 AM | #10 |
Private First Class
48
Rep 164
Posts |
Free bump. I have these on my car and am very happy with them.
__________________
2014 F30 335i xDrive 6MT - Pure Stage 2 GFB DV / Inlet | XDI-35 HPFP | Fuel-It PI w/ AIC and LPFP Upgrade | BM3 | Fabspeed Catted DP | Dinan axle back | VRSF Race FMIC/CP | Dinan CAI | KW V3 | Wiechers CF strut bar | Dinan ARB | Spec stage 2+ clutch SMFW | Full M Performance Interior | M Performance BBK | Vorsteiner VFF107 MPS4S | Jordan Tuned Full E85 - 558WHP/520TQ on Mustang Dyno
|
Appreciate
1
IK6SPEED4488.00 |
Post Reply |
Bookmarks |
|
|