PSdZData Full vs. Lite

shawnsheridan · 01-15-2019, 01:27 PM

Quote:

Originally Posted by smr.andrei

Hello, can i get a link with everything i need to install and use ESYS?

Thank you.

You cannot Send or Receive PM's. Send me one when you can.

smr.andrei · 01-15-2019, 01:35 PM

Quote:

Originally Posted by shawnsheridan

You cannot Send or Receive PM's. Send me one when you can.

Done

ederbalmeida · 01-19-2019, 10:07 AM

Quote:

Originally Posted by shawnsheridan

You cannot Send or Receive PM's. Send me one when you can.

Hey Shawn,

Could I get the link to the PSdZData (full)?

Thank you!

shawnsheridan · 01-19-2019, 10:09 AM

Quote:

Originally Posted by ederbalmeida

Hey Shawn,

Could I get the link to the PSdZData (full)?

Thank you!

PM sent.

elthox · 01-19-2019, 02:32 PM

Hey shawn,

Can i have full psdzdata link please?

Thanks

shawnsheridan · 01-19-2019, 02:33 PM

Quote:

Originally Posted by elthox

Hey shawn,

Can i have full psdzdata link please?

Thanks

PM sent.

batgun · 01-20-2019, 06:34 AM

I bought enet cable with e-sys cds from a well known china web site.
it seems I setup everything well and connected to car successfully.
problem is i have received error like "xxxx not found" when i click read data.
as far as i investigate, this is because of outdated PSDzDATA file-my car is 2016 f30.
can anyone -probably shawnsheridan- sent me latest files? I am not sure if it matters but ESYS version is also 3.25.3

shawnsheridan · 01-20-2019, 10:25 AM

Quote:

Originally Posted by batgun

I bought enet cable with e-sys cds from a well known china web site.
it seems I setup everything well and connected to car successfully.
problem is i have received error like "xxxx not found" when i click read data.
as far as i investigate, this is because of outdated PSDzDATA file-my car is 2016 f30.
can anyone -probably shawnsheridan- sent me latest files? I am not sure if it matters but ESYS version is also 3.25.3

PM sent.

FR13ND · 01-24-2019, 06:05 AM

Hi shawn

Can i have full psdzdata link please?

Thanks.

bgalakazam · 01-24-2019, 06:10 AM

Quote:

Originally Posted by shawnsheridan

Many people now are flashing NBT Units to the new iDrive 4.2 firmware, which adds many things.

Any idrive flashing for entrynav available?

shawnsheridan · 01-24-2019, 06:58 AM

Quote:

Originally Posted by bgalakazam

Any idrive flashing for entrynav available?

You can flash any ECU. I have no idea if you will see any iDrive improvements with your Head Unit or not though.

shawnsheridan · 01-24-2019, 06:59 AM

Quote:

Originally Posted by FR13ND

Hi shawn

Can i have full psdzdata link please?

Thanks.

PM sent.

Lsanchez · 01-27-2019, 03:03 PM

Hey shawn,

Can you please send me the link?
I have Esys 3.28.1

Thanks

shawnsheridan · 01-27-2019, 03:12 PM

Quote:

Originally Posted by Lsanchez

Hey shawn,

Can you please send me the link?
I have Esys 3.28.1

Thanks

E-Sys 3.27.1 is preferred. Newer E-Sys versions have issues. PM sent.

T3M0 · 01-29-2019, 10:08 AM

Hello,

Can I please get a link aswell?

Thx in advance.

// T3M0

shawnsheridan · 01-29-2019, 10:24 AM

Quote:

Originally Posted by T3M0

Hello,

Can I please get a link aswell?

Thx in advance.

// T3M0

PM sent.

pcp1234 · 01-30-2019, 08:08 PM

updated another car yesterday, below time stats; was F010-12-11-502 to F010-18-11-520
1. ZGW = 3min 2sec
2. EGS = 1min 26sec
3. DSC = 4min 31sec
4. PDC = 0min 14sec
5. EKPM = 1min 31sec
6. FZD = 2min 41sec
7. FRM = 0min 19sec
8. JBBF = 1min 39sec
9. EPS = 1min 59sec
10. CAS = 4min 42sec
11. SZL = 1min 53sec
12. EMF = 1min 45sec
13. EHL = 2min 18sec
14. HKMF = 2min 2sec
15. KOMBI = 3min 24sec
16. ICM = 3min 41sec
17. CMB = 0min 13sec
18. IHKA = 4min 23sec

overall 41mins and 43sec

Travel4surf · 01-30-2019, 09:56 PM

Quote:

Originally Posted by pcp1234

updated another car yesterday, below time stats; was F010-12-11-502 to F010-18-11-520
1. ZGW = 3min 2sec
2. EGS = 1min 26sec
3. DSC = 4min 31sec
4. PDC = 0min 14sec
5. EKPM = 1min 31sec
6. FZD = 2min 41sec
7. FRM = 0min 19sec
8. JBBF = 1min 39sec
9. EPS = 1min 59sec
10. CAS = 4min 42sec
11. SZL = 1min 53sec
12. EMF = 1min 45sec
13. EHL = 2min 18sec
14. HKMF = 2min 2sec
15. KOMBI = 3min 24sec
16. ICM = 3min 41sec
17. CMB = 0min 13sec
18. IHKA = 4min 23sec

overall 41mins and 43sec

Can you update the HU_NBT to the latest rev?

pcp1234 · 01-31-2019, 04:16 AM

yes, it can be done but I cant risk it without external power supply and it takes a bit time

plurant · 02-11-2019, 03:01 AM

Quote:

Originally Posted by shawnsheridan

PM sent.

hello, could i get a link to te latest full data please ?

And can all modules be updated via esys and enet cable ? Do you need a token to update the ecus ?

Thanks in advance !

shawnsheridan · 02-11-2019, 07:00 AM

Quote:

Originally Posted by plurant

hello, could i get a link to te latest full data please ?

And can all modules be updated via esys and enet cable ? Do you need a token to update the ecus ?

Thanks in advance !

PM sent.

Yes, all ECU, and token not required for flashing.

sea_m2c · 02-11-2019, 02:13 PM

Quote:

Originally Posted by shawnsheridan

Quote:

Originally Posted by plurant

hello, could i get a link to te latest full data please ?

And can all modules be updated via esys and enet cable ? Do you need a token to update the ecus ?

Thanks in advance !

PM sent.

Yes, all ECU, and token not required for flashing.

I am looking to code a F22 LCI cluster to a pre-LCI car. Do you (or anyone) know if the full data file is required to code that ECU?

Having done the FZD ECU coding when I did my alarm retrofit, I wouldn't think so - but another member on a different forum said I would.

As always, thanks for your wealth of knowledge Shawn!

01-19-2019, 02:32 PM	#753
elthox Private 4 Rep 68 Posts Drives: E91 330xd stage 1 Join Date: Oct 2017 Location: tirana iTrader: (0)	Hey shawn, Can i have full psdzdata link please? Thanks
	Appreciate 0 Quote

01-20-2019, 06:34 AM	#755
batgun Registered 0 Rep 2 Posts Drives: F30 LCI 320D xDrive Join Date: Jan 2019 Location: Turkey iTrader: (0)	I bought enet cable with e-sys cds from a well known china web site. it seems I setup everything well and connected to car successfully. problem is i have received error like "xxxx not found" when i click read data. as far as i investigate, this is because of outdated PSDzDATA file-my car is 2016 f30. can anyone -probably shawnsheridan- sent me latest files? I am not sure if it matters but ESYS version is also 3.25.3
	Appreciate 0 Quote

01-24-2019, 06:05 AM	#757
FR13ND Registered 0 Rep 2 Posts Drives: BMW 5 serie Join Date: Jan 2019 Location: Poland iTrader: (0)	Hi shawn Can i have full psdzdata link please? Thanks.
	Appreciate 0 Quote

01-27-2019, 03:03 PM	#761
Lsanchez New Member 6 Rep 6 Posts Drives: BMW F20 Join Date: Jun 2018 Location: Costa Rica iTrader: (0)	Hey shawn, Can you please send me the link? I have Esys 3.28.1 Thanks
	Appreciate 0 Quote

01-29-2019, 10:08 AM	#763
T3M0 Registered 0 Rep 1 Posts Drives: F34 Join Date: Aug 2018 Location: Sweden iTrader: (0)	Hello, Can I please get a link aswell? Thx in advance. // T3M0
	Appreciate 0 Quote

01-30-2019, 08:08 PM	#765
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	updated another car yesterday, below time stats; was F010-12-11-502 to F010-18-11-520 1. ZGW = 3min 2sec 2. EGS = 1min 26sec 3. DSC = 4min 31sec 4. PDC = 0min 14sec 5. EKPM = 1min 31sec 6. FZD = 2min 41sec 7. FRM = 0min 19sec 8. JBBF = 1min 39sec 9. EPS = 1min 59sec 10. CAS = 4min 42sec 11. SZL = 1min 53sec 12. EMF = 1min 45sec 13. EHL = 2min 18sec 14. HKMF = 2min 2sec 15. KOMBI = 3min 24sec 16. ICM = 3min 41sec 17. CMB = 0min 13sec 18. IHKA = 4min 23sec overall 41mins and 43sec
	Appreciate 1 atzebmw588.00 Quote

01-31-2019, 04:16 AM	#767
pcp1234 Private 27 Rep 87 Posts Drives: G03 Join Date: Jul 2018 Location: Leeds iTrader: (0)	yes, it can be done but I cant risk it without external power supply and it takes a bit time __________________ Codings; navigation updates; carplay; software updates; retrofits https://www.instagram.com/bimmer_werks86/
	Appreciate 0 Quote