03-23-2024, 11:50 AM | #1 |
Major General
4528
Rep 5,392
Posts
Drives: 2015 BMW 335i x-Drive Auto
Join Date: Oct 2017
Location: New Jersey/Philadelphia
|
Specs for Bolts that holds on Electronic Wastegate
Anyone with an N55 EWG, do you have the specs for the four bolts that attach the electronic wastegate to the turbo? I was told that BMW only sells the bolts with the wastegate. I’m hoping that someone has the bolt specs, photos, part number? It’s probably an M4 or M6 with an integral washer. Someone told me that it’s an M4x12. I’m hoping to obtain a photo and BMW part number. They must use it somewhere else. Thanks!
|
03-26-2024, 06:37 PM | #2 |
Major
640
Rep 1,381
Posts |
Sorry for going slightly off topic, but were you attempting to adjust the wastegate flapper to stop rattling?
MHD claim to help fix this with their tune but mine still has a slight rattle especially on cold starts.
__________________
2015 435i - 401whp
Scorpion catless dp, VRSF 6.5" HD FMIC, MST V2 inlet, NGK 97506, MHD Stage 2+ 102, xHP Stage 3, M Performance Exhaust (modified for valved straight thru) |
Appreciate
0
|
03-26-2024, 06:39 PM | #3 |
Major General
4528
Rep 5,392
Posts
Drives: 2015 BMW 335i x-Drive Auto
Join Date: Oct 2017
Location: New Jersey/Philadelphia
|
No. Just trying to replace all of the fasteners during a turbo install. Good idea to do so with parts subjected to heat for many years
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|