[biomed27]

Anybody with adaptive LEDs on their F30 mind posting beam pattern/cut off pictures against a wall?

[chinniciF32]

*free bump

dont everyone respond all at once

[biomed27]

No luck

[fortythirtyfive]

I asked this a long while ago and got nothing, I retrofitted the adaptive icons and needed to align them. It turns out dealers have a pretty intelligent machine that hooks up to the front of the headlight and measures the beam whilst adjusting it.

[biomed27]

Originally Posted by fortythirtyfive

I asked this a long while ago and got nothing, I retrofitted the adaptive icons and needed to align them. It turns out dealers have a pretty intelligent machine that hooks up to the front of the headlight and measures the beam whilst adjusting it.

Did you go from non adaptive to adaptive?

[fortythirtyfive]

Originally Posted by biomed27

Did you go from non adaptive to adaptive?

Yeah, I bought the wiring kit from Marius that converts the existing loom from non adaptive to adaptive.

[biomed27]

Shouldn't the adaptive be plug and play aside from coding?

[pearlpower]

I can this weekend if you still need the pic. Distance?

[biomed27]

Originally Posted by pearlpower

I can this weekend if you still need the pic. Distance?

Thank you so much! Around 5 feet and 25 feet ideally, but I won't be picky. Doing me a huge favor already

[fortythirtyfive]

Originally Posted by biomed27

Shouldn't the adaptive be plug and play aside from coding?

Not if you're going from non adaptive (especially pre-lci) as you need to run new canbus wires and repin the harness plug to supply the right information.