03-21-2021, 07:10 PM | #1 |
Enlisted Member
32
Rep 39
Posts |
So after BMW locked my DME I unlocked and reflashed bootmod stage 2 93 again (last time was back in July when I installed my downpipe) but now I do not get the loud pops when revving up to high rpms and letting off. I contacted PTF and they said try the AGG tune.. same.. no pops / burble at all at higher rpm. I checked my custom settings and burble set to max rpm. Any else notice this? Maybe they made a change?
|
03-21-2021, 08:07 PM | #2 |
Second Lieutenant
42
Rep 265
Posts
Drives: 2018 BMW M4 Vert
Join Date: Feb 2020
Location: California
|
same! I'm running it and after a wot in 3/4 no burbles.
|
Appreciate
0
|
04-01-2021, 07:44 AM | #3 |
Enlisted Member
32
Rep 39
Posts |
Contacted PTF and now going back and forth with them. They keep updating the tune and I have been re-flashing but still not figured out as of yet... about the 8th flash so far.. about to give up at this point.
|
Appreciate
0
|
04-03-2021, 08:06 AM | #4 |
Second Lieutenant
147
Rep 201
Posts |
I have burbles to be quirky. Sometimes have to reflash custom setting a couple of times to get it to actually work for what ever reason. Also have found they come alive easier in manual mode.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|