[034Motorsport]

     Featured on BIMMERPOST.com

034Motorsport Hardware Information + New Product Info





In this post, we will talk about the products that 034Motorsport offers for the F3X B58 platform to enhance the performance of the B58 engine, and the chassis as a whole. We are here to offer an extensive product catalog of Substantive, quality parts that provide measurable improvements to your enjoyment of your car, so that you can kick ass at a drag strip, track day, or autocross event, and drive the car to work the next day with comfort and confidence. Below will be some links to the products we offer, as well as upcoming products you can expect to see in the future. If anyone has questions about products, feel free to use the comments as a place to discuss.

034Motorsport started in 2005 with a passion for bringing motorsport-quality performance upgrades and tuning to Audi and Volkswagen vehicles. The company has since evolved and grown to meet the expanding needs of enthusiasts, but the underlying passion for innovation, performance, and quality remains. We are dedicated to providing our customers with only the best performance products, tuning, and service for their Audi or Volkswagen. We have been making products for BMWs since the early 2010s and have recently started to develop BMW products for our 2017 BMW 340i, and we are excited to join the BMW F3X community!

PRODUCT LINKS

POWERTRAIN
P34 Cold Air Intake System, BMW F2X/F3X B58 3.0L: CLICK HERE
X34 Carbon Fiber Cold Air Intake System, BMW F2X/F3X B58 3.0L: CLICK HERE
Stainless Steel Racing Catalyst, BMW F2x/F3x B58 Vehicles: CLICK HERE

SUSPENSION
Dynamic+ Lowering Springs, BMW F3X Chassis: CLICK HERE
034Motorsport Dynamic+ Sway Bar Kits, BMW F2X/F3X Chassis: CLICK HERE
Rebuilt Kit, Adjustable Front Sway Bar, BMW F2x/F3x/E9x: CLICK HERE

CHASSIS
Billet Aluminum Rear Subframe Insert Kit, BMW F2x/F3x Chassis: CLICK HERE
Transmission Mount, Street Density Line, BMW: CLICK HERE
Billet Aluminum Rear Differential Insert Kit, BMW F2X/F3X Chassis: CLICK HERE
Street Density Motor Mounts, BMW F2X/F3X Chassis: CLICK HERE

UPCOMING PRODUCTS/TUNING OPTIONS
We will use the comment section to share photos of upcoming products as they go through development, and add the links to the main post once they become available.

• Adjustable End Links
• Adjustable Toe Links

[mike@x-ph.com]

[pauli18c]

"SPRING RATES:
~14% Increase in Front - 220lbs/in (stock: 193 lbs/in)
~23% Increase in Rear - 650lbs/in (stock: 530 lbs/in)

RIDE HEIGHT:
Front - Approximately 19mm (3/4") Lower
Rear - Approximately 9mm (3/8") Lower"

What car are these measurements taken from?
For the ride height drop, was this from a 340i M Sport suspension, or the standard suspension? Rwd or X-Drive?

[BaconDouble]

Originally Posted by pauli18c

"SPRING RATES:
~14% Increase in Front - 220lbs/in (stock: 193 lbs/in)
~23% Increase in Rear - 650lbs/in (stock: 530 lbs/in)

RIDE HEIGHT:
Front - Approximately 19mm (3/4") Lower
Rear - Approximately 9mm (3/8") Lower"

What car are these measurements taken from?
For the ride height drop, was this from a 340i M Sport suspension, or the standard suspension? Rwd or X-Drive?

Their blue shop car seems to be a 340i RWD, at least that's what I can discern by looking at the pictures on the various install PDFs in the BMW F3X section.

I like these wheels BTW.

Check the last page on the PDF for a shot of the rear of the car:
https://www.034motorsport.com/docs/0...structions.pdf

[034Motorsport]

Originally Posted by pauli18c

"SPRING RATES:
~14% Increase in Front - 220lbs/in (stock: 193 lbs/in)
~23% Increase in Rear - 650lbs/in (stock: 530 lbs/in)

RIDE HEIGHT:
Front - Approximately 19mm (3/4") Lower
Rear - Approximately 9mm (3/8") Lower"

What car are these measurements taken from?
For the ride height drop, was this from a 340i M Sport suspension, or the standard suspension? Rwd or X-Drive?

These were measured from our F30 340i RWD shop car with the factory M-Sport Suspension. We have not test-fitted these on an X-Drive model, and cannot confirm the fitment at this time.



-Justin@034

[034Motorsport]

Watch us put our development F30 BMW 340i car through its paces while being chased by a BMW F87 M2 at Buttonwillow Raceway!

High-speed driving scenarios like long sessions at a race track allow our teams to ensure our products hold up to the most extreme abuse and make necessary changes to provide the most optimized and transformed handling experience.

Modifications List
- Stock ECU + TCU
- Dynamic+ Lowering Springs
- Dynamic+ Front & Rear Sway Bar
- P34 Cold Air Intake
- Billet Rear Differential Inserts
- Billet Rear Subframe Inserts
- Street Density Transmission Mounts
- Density Line Motor Mounts (Coming Soon!)

Check out the products we offer for the vehicle here!

[cfm56d7b]

Question about springs: are they progressive?

[imperialgrunt]

Billet Aluminum Rear Subframe Insert Kit
Transmission Mount, Street Density Line
Billet Aluminum Rear Differential Insert Kit

Are these chassis mods worth investing in day to day non-track driving? I don’t know much about either one of these, expect the rear subframe insert that I used to have in my MK7 from 034.

[G30 B58]

It's nice to see an older chassis being modified and tracked.

[2Times]

Familiar brand, coming from an Audi. Looking forward to seeing what they do on the tuning side

[034Motorsport]

Originally Posted by cfm56d7b

Question about springs: are they progressive?

Our Dynamic+ Lowering Springs are linear, not progressive.

-Justin@034

[034Motorsport]

Originally Posted by imperialgrunt

Are these chassis mods worth investing in day to day non-track driving? I don’t know much about either one of these, expect the rear subframe insert that I used to have in my MK7 from 034.

Even for daily driving, our Billet Inserts substantially help pick up the slop found in the factory subframe mounts and differential mounts, resulting in a more responsive on-throttle feel, as well as chassis rigidity and handling dynamics through a corner.

-Justin@034

[jamborees]

Ordered the P34 B58 air box this morning from the UK store. Love the OEM+ look you’ve got on them. Looking forward to getting it fitted and hearing some turbo flutter!! Thing sounds nuts on the video

[Stucks]

On the website, for the P34 intake it says CFM @ 28" for the stock intake is 647. For the X34 intake, it says the same CFM for the stock intake is 590. What is the correct value?

P34 - OE Intake: 674 CFM (@ 28in H2O)
X34 - "Stock Intake: 590 CFM @ 28” H2O"

[034Motorsport]

Originally Posted by jamborees

Ordered the P34 B58 air box this morning from the UK store. Love the OEM+ look you’ve got on them. Looking forward to getting it fitted and hearing some turbo flutter!! Thing sounds nuts on the video

Thank you for supporting us! I think you'll be very pleased with the results!

-Justin@034

[034Motorsport]

Originally Posted by Stucks

On the website, for the P34 intake it says CFM @ 28" for the stock intake is 647. For the X34 intake, it says the same CFM for the stock intake is 590. What is the correct value?

P34 - OE Intake: 674 CFM (@ 28in H2O)
X34 - "Stock Intake: 590 CFM @ 28” H2O"

It looks like it was just a typo on our end, 674 CFM is the correct rating for the stock intake. We had listed 674 CFM in other areas of the website, so it must've just been a typo.

This has since been resolved, thank you for catching that!

-Justin@034

[strawhatdan]

I'm thinking about getting the springs right now. Worth it to get them alone or do you recommend getting the sway bars as well?

[034Motorsport]

Originally Posted by strawhatdan

I'm thinking about getting the springs right now. Worth it to get them alone or do you recommend getting the sway bars as well?

Our Dynamic+ Lowering Springs would certainly improve both the handling and stance of your 440i even without upgrading your sway bars. However, doing both would substantially transform the handling performance and overall driving dynamics of your car. Our sway bars really help the F3x chassis stay planted through corners, as body roll is drastically reduced.

You can't go wrong doing one or the other first, especially if you plan on eventually getting both done!

-Justin@034

[034Motorsport]

034Motorsport Street Density Motor Mounts are the new standard in comfort and performance. These mounts are redesigned with performance in mind and manufactured from high-durometer rubber for increased performance and durability without sacrificing comfort. Street Density Motor Mounts are optimized void-free and fluid-free, eliminating the slop and the possibility of leakage and collapse associated with the factory mounts.

Street Density Motor Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to the complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance and comfort.

034Motorsport Street Density F3X BMW Motor Mounts are also compatible with the BMW Motorsport Motor Mount Reinforcement Inserts

FEATURES:

• Manufactured from 60 Durometer Rubber with Optimized Void-Free Construction (No Fluid to Leak Out)
• Reduced Drivetrain Slop
• Decreased Engine Movement Under Load
• More Direct Power Transfer
• Improved Shifting Feel
• Minimal to No Added NVH, Slightly Noticeable at Idle but Not When Driving
• Complete Drop-In Replacement of Factory Engine Mounts
• Compatible with BMW Motorsport Motor Mount Reinforcement Inserts
• Sold as a Set (2 mounts)

WHAT’S INCLUDED:

• (1x) Left Motor Mount
• (1x) Right Motor Mount

PART NUMBER INTERCHANGE:

• 22 11 6 787 659 (left side)
• 22 11 6 855 460 (right side)

Check It Out Here!

[conejodenieve]

Very cool to see you guys are making stuff for the F30 and B58 platform! Any plans for 2 piece rotors being released?

[034Motorsport]

Originally Posted by conejodenieve

Very cool to see you guys are making stuff for the F30 and B58 platform! Any plans for 2 piece rotors being released?

We don't have plans for 2-piece rotors at this time.

-Justin@034