[boostd435]

Looking to get a set of work emotion cr kiwami.
FR: 19x9.5 ET 25
R: 19x10.5 ET 22
Or should i get ET 15 in front and 32 in back?
Tryna have the wheels flush with fenders
Not too knowledgeable when it comes to offsets and what not

[DThr33]

They're fairly aggressive offsets for f3x, you'll probably need to run a good amount of camber/stretch to get them to fit within the arches.

[.BMW.]

Originally Posted by DThr33

They're fairly aggressive offsets for f3x.

To say the least!

[DThr33]

Originally Posted by .BMW.

To say the least!

Lol true. My fronts are 9j et25 and with stock camber levels they poke out of the arches a good ~5mm. 9.5j et25 would be even worse

Rear's a whole other story, I run 10j et40 and it sits pretty much flush, 10.5j et22 would poke a shitload. Even the et32 you'd need to stretch/camber a fair bit for it to fit

[boostd435]

Originally Posted by DThr33

Lol true. My fronts are 9j et25 and with stock camber levels they poke out of the arches a good ~5mm. 9.5j et25 would be even worse

Rear's a whole other story, I run 10j et40 and it sits pretty much flush, 10.5j et22 would poke a shitload. Even the et32 you'd need to stretch/camber a fair bit for it to fit

Will 38 in front and 32 in back fit better? (Same wheel widths)

[ronanz]

I'm flush with 19" 9.0 +35 / 10 +42

Michelin PS 4S 245/35 x 275/30


EDIT: Sorry, offsets aren't the wheels you're looking at...mine are based on Forgestar CF5V


.