10-17-2023, 02:36 AM | #1 |
Registered
0
Rep 1
Posts |
What is the charge pipe that go well with the CSF intercool (N26 f33)
Hi everyone, I have 16' n26 f33.
I went to the shop and installed an er200 downpipe and csf intercooler a few days ago. When I went there, I heard from field mechanic that he tried to install an ftp charge pipe and an intake pipe, but it was impossible to install due to interference with the csf intercooler. However, the person in the link video below completed the work. Is this a difference of 28i 35i? My acquaintance also has the same csf intercooler and says he bought an er charge pipe and crashed into another area as the pipe trembled at low rpm. He said he eventually sold the pipe to someone else because of the noise. I'd like to get a recommendation for a pipe that doesn't interfere with the csf intercooler. |
10-17-2023, 09:44 AM | #2 |
BimmerPost Supporting Vendor
24193
Rep 190,805
Posts |
MAD charge pipe should work without any issues
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
10-21-2023, 08:49 AM | #3 |
Private
24
Rep 51
Posts |
I installed the FTP charge pipe on my F32 N26 with the CSF 8115B intercooler and had no problems. The bigger issue is finding a boost pipe that will go from the turbo to the intercooler. I'm still running the stock boost pipe as I was unable to find one that would work with it.
__________________
2016 BMW 428i F32 Coupe N26, Midnight Blue/Tan interior, CSF 8115B, FBO's, Navardi Stage 2 tune, HiFlo Cat and Mid-Pipe, Valvetronic Axle Back, H&R Super Sport springs, 20x9 33et 20x10.5 46et, 245/30ZR20 285/25ZR20, updated from Sportline to M-Sport Exterior
|
Appreciate
0
|
10-21-2023, 01:53 PM | #4 |
Major
476
Rep 1,065
Posts |
Turner will work. Otherwise if you use the FTP boost pipe you have to shorten it by 1/2” on the pipe that connects to the intercooler side (cut and weld) or the er you have to cut and weld as well, don’t know how much of a difference you need however
__________________
MY13: TTE400 Stage 2 turbo.
e80 tune by Navardi Tuned. 380 whp/360 wheel torque stock block Build Thread: https://f30.bimmerpost.com/forums/sh....php?t=1742413 IG + YT: Sqwin_n20 |
Appreciate
0
|
10-28-2023, 12:17 PM | #5 | |
BimmerPost Supporting Vendor
24193
Rep 190,805
Posts |
Quote:
all charge pipes will work with CSF intercooler, its the boost pipe that's the problem.
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
0
|
11-23-2023, 10:14 PM | #6 | |
New Member
25
Rep 13
Posts |
Quote:
keep in mind tho csf intercooler is much more supperior when it comes to performance compared to vrsf it's very unfortunate that they have this fitting issue when matched with ftp pipe , maybe if you use different bp,cp brand it could works |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|